Wall Mounted
Designed to cool or heat small to medium sized spaces, the Mitsubishi Electric split wall mounted ranges provide a versatile solution for front and back of house.
- Range 2kW to 10kW
- Compact design Variety of finishes
- Top of the range high COP/EER inverter range
- Low noise
- Infra-red or wall controller available
Cassette
At least 1 in 4 units on the UK high street is a Mitsubishi Electric cassette; Quick, cost effective and easy to install for the majority of retail applications.
- Quick and simple installation within retail spaces
- Range 2.5kW – 14kW capacity
- Low Noise Level
- Flexible & customized airflow patterns
- High efficiency fan motors
- Large range of ECA approved products
- Single, Twin, Triple, Quad Applications
Drop Down Grille
Perfect for spaces with high ceilings or a need for regular filter cleaning. This innovative solution will save time and money and can be used without cleaning platforms by non-technical operatives.
- Improves energy performance with regular filter cleaning
- Fast and easy access for ceilings up to 4m
- Improved health and safety and reduce maintenance time
- Filter can be cleaned by a non-skilled workers, reducing cost
- Reduced ceiling staining
- Controlled from IR and Wall controller
3D i-see Sensor
The optional Mitsubishi Electric 3D i-see sensor is one of the most advanced features available for ceiling cassettes in the market. It is embedded into the grille and directs targeted cooling to the areas that it identifies.
- 360 degree highly accurate sensor
- Energy saving modes including occupancy intelligent temperature adjustment
- Human body temperature, room occupancy and position detection
- Intelligent air movement to deal with hot spots and draughts
Heat Pump Warm Air Curtain
In collaboration with Thermoscreens Ltd, Mitsubishi Electric have developed a range of heat pump warm air curtains maintaining comfort levels and preventing conditioned air from escaping during open door trading.
- Connectable to either Split or VRF systems
- Range 8kW to 21kW
- Door widths 1m, 1.5m and 2m
- Reduced CO2 emissions and running cost
- Typical payback 1.5 to 2.5 years
- Intelligent controls – weather compensation
- ECA approved
Local Control
Mitsubishi Electric’s standard remote controller leads the industry with its design and enhanced features.
- Backlit screen
- Control of up to 16 fancoils
- Control of mode, dual setpoint, fan speed, night setback etc.
- Monitoring of temperature, fault codes etc.
- 7 day time scheduling
- Feature Lockout to prevent staff tampering
- Coloured controller glow to indicate operation mode
Remote access web based control
MelcoRetail, Mitsubishi Electric’s innovative web based controller provides access to a client’s full estate remotely.
- Two models available via LAN or GPRS
- Advanced energy saving features
- Controls third party equipment including lighting, alarms, ventilation etc.
- Energy metering capability
- Control via PC, smartphone or tablet
- National coverage of multiple sites
Heat Recovery Ventilation
Mitsubishi Electric’s Lossnay unit uses state-of-the-art heat exchange technology that enables CO2 reduction and energy saving. Designed to supply fresh air into any commercial building whilst simultaneously extracting stale air and, most importantly, recovering valuable heat energy for maximum efficiency.
- Reduced Energy usage
- Interlocks with AC
- Night purge or free cooling with fresh air possible
- Improved air quality and comfort such as CO2 control
- Single or double stacked units available
Outdoor Condensing Units
Suitable to cool or heat a huge variety of applications, our Mr Slim range is the UK’s market leading choice of split-systems.
- Range 2.5kW to 44kW
- Top of the range Power Inverter technology optimised for high seasonal efficiencies
- Up to 100m pipe run
- Twin fan wall mountable 20 & 25kW units
- Low noise operation
- Enhanced Capital Allowance (ECA) ranges
- Connects to cassettes, ducted, floor, wall or ceiling mounted indoor units
Ducted unit
An unobtrusive ducted installation will provide maximum flexibility and enhanced airflow to larger spaces. Some fresh air ventilation can also be combined to the supply air.
- Range 2.5kW – 50kW
- Available in ultra low height for small ceiling voids
- Low, medium and high static fan models
- Very low noise levels
- Remote sensor option available to
read and control room temperature
VRF System
Suitable to cool or heat a huge variety of applications such as retail units, our City Multi VRF range provides superb efficiency and innovative technology. Multiple units are connectable to a single outdoor unit.
- Sizes 12kW to 140kW
- Available in Heat Pump and Heat recovery
- Air cooled or water cooled models
- 2 pipe Heat Recovery design
- New aluminium heat exchanger
- Low noise operation
- Hybrid VRF range available enabling water
- Available in standard and high COP version
Water Heating
The Ecodan QUHZ 4kW Monobloc is the ideal solution to provide instantaneous hot water from an air source heat pump.
- High efficiency hot water heating from air source heat pump
- Class leading low noise operation
- Energy monitoring as standard
- No stored water, no risk of legionella
- Pre-plumbed and wired for fast installation
- Wi-Fi control
- 4kW monobloc
- Water supplied from 40 - 70°C
- Runs on CO2
Chillers
Mitsubishi Electric now offer a choice of chillers to the UK market.
E Series Modular Chiller range:
- VRF technology linked with chilled water production
- 90kW modules
- Superior efficiency ESEER over 5.66
- Ultra low sound pressure levels 65dba
- Available ex-stock
Climaveneta range:
- Air Source and Water Cooled versions
- Fully customisable and scalable up to 350kW
- Plate or shell and tube heat exchangers
Climaveneta was purchased by Mitsubishi Electric in 2015, further enhancing our product line up.
